Human response to vibration in residential environments (NANR209), technical report 2: measurement of response

Based on a review of the literature and the best practice guidance available, a social survey questionnaire was developed to measure residents’ self-reported annoyance and to provide data suitable for establishing exposure-response relationships between levels of annoyance and levels of vibration. The development of the questionnaire was influenced by a number of previous studies such as: the social survey questionnaire developed for the NANR172 Pilot Study of this research (Defra, 2007); best practice guidelines for the development of socio-acoustic surveys issued by ICBEN and presented in the current International Standard (Fields et al., 2001; ISO/TS 15666:2003); the Nordtest Method (2001) for the development of socio-vibration surveys, and a peer review of the social survey questionnaire by international experts in the field. In order to avoid influencing responses and reasons for participation in the research, the survey was introduced as a survey of neighbourhood satisfaction. The questionnaire design, through the use of sections, enables new sections to be added to the questionnaire so that specific vibration sources can be investigated in more depth. In addressing the ‘response’ component in the ‘exposure-response’ relationship, the questionnaire was designed to yield interval-level measurement data suitable for analysis with vibration measurement data via two response scales: the five-point semantic and the eleven-point numerical scales. This decision was largely founded upon the ability of the two scales to meet the criteria established by ICBEN (Fields et al., 2001) for socio-acoustic survey design. Detailed procedures were documented, following the field trial of the questionnaire, in terms of the role of the interviewer, the recording of information and the transfer of the data to the relevant database for subsequent analysis and to inform the vibration team responsible for the ‘exposure’ component of this research project

Human response to vibration in residential environments (NANR209), executive summary

The aim of the Defra-funded project NANR209 ‘Human response to vibration in residential environments’ was to develop exposure-response relationships for vibration experienced in residential environments from sources outside of the residents’ control. The project was performed at the University of Salford between January 2008 and March 2011. The final report was published on the Defra website on 6th September 2012. The NANR209 Final Report consists of the following documents: • Executive summary • Final project report • Technical report 1: Measurement of vibration exposure • Technical report 2: Measurement of response • Technical report 3: Calculation of vibration exposure • Technical report 4: Measurement and calculation of noise exposure • Technical report 5: Analysis of the social survey findings • Technical report 6: Determination of exposure-response relationships This document is the Executive summary

Human response to vibration in residential environments (NANR209), Technical report 6 : determination of exposure-response relationships

This technical report presents the development of exposure-response relationships for the human response to vibration in residential environments. The data used to formulate the relationships presented in this report are those which were collected for the Defra funded project “NANR209: Human response to vibration in residential environments”, the main aim of which was the development of exposure-response relationships. Vibration caused by railway traffic, construction work, and internal sources outside of the residents’ control were considered. Response data was collected via face to face interviews with residents in their own homes. The questionnaire was presented as a neighbourhood satisfaction survey and gathered information on, among other things, annoyance caused by vibration and noise exposure. Development and implementation of the questionnaire used for the collection of response data is discussed in Technical Report 2 and Technical Report 5. Vibration exposure was determined via measurement and prediction in such a way that, where possible, an estimation of internal vibration exposure was established for each residence in which a questionnaire was completed. The measurement procedures and methods employed to estimate vibration exposure are detailed in Technical Report 1 and Technical Report 3. Estimations of noise exposure were also derived for each residence using the methods detailed in Technical Report 4

Human response to vibration in residential environments

This paper presents the main findings of a field survey conducted in the United Kingdom into the human response to vibration in residential environments. The main aim of this study was to derive exposure-response relationships for annoyance due to vibration from environmental sources. The sources of vibration considered in this paper are railway and construction activity. Annoyance data were collected using questionnaires conducted face-to-face with residents in their own homes. Questionnaires were completed with residents exposed to railway induced vibration (N = 931) and vibration from the construction of a light rail system (N = 350). Measurements of vibration were conducted at internal and external positions from which estimates of 24-h vibration exposure were derived for 1073 of the case studies. Sixty different vibration exposure descriptors along with 6 different frequency weightings were assessed as potential predictors of annoyance. Of the exposure descriptors considered, none were found to be a better predictor of annoyance than any other. However, use of relevant frequency weightings was found to improve correlation between vibration exposure and annoyance. A unified exposure-response relationship could not be derived due to differences in response to the two sources so separate relationships are presented for each source. (C) 2014 Acoustical Society of America

Temporal trends in mode, site and stage of presentation with the introduction of colorectal cancer screening: a decade of experience from the West of Scotland

background:  Population colorectal cancer screening programmes have been introduced to reduce cancer-specific mortality through the detection of early-stage disease. The present study aimed to examine the impact of screening introduction in the West of Scotland. methods:  Data on all patients with a diagnosis of colorectal cancer between January 2003 and December 2012 were extracted from a prospectively maintained regional audit database. Changes in mode, site and stage of presentation before, during and after screening introduction were examined. results:  In a population of 2.4 million, over a 10-year period, 14 487 incident cases of colorectal cancer were noted. Of these, 7827 (54%) were males and 7727 (53%) were socioeconomically deprived. In the postscreening era, 18% were diagnosed via the screening programme. There was a reduction in both emergency presentation (20% prescreening vs 13% postscreening, P0.001) and the proportion of rectal cancers (34% prescreening vs 31% pos-screening, P0.001) over the timeframe. Within non-metastatic disease, an increase in the proportion of stage I tumours at diagnosis was noted (17% prescreening vs 28% postscreening, P0.001). conclusions:  Within non-metastatic disease, a shift towards earlier stage at diagnosis has accompanied the introduction of a national screening programme. Such a change should lead to improved outcomes in patients with colorectal cancer

Ultrasensitive force detection with a nanotube mechanical resonator

Since the advent of atomic force microscopy, mechanical resonators have been used to study a wide variety of phenomena, such as the dynamics of individual electron spins, persistent currents in normal metal rings, and the Casimir force. Key to these experiments is the ability to measure weak forces. Here, we report on force sensing experiments with a sensitivity of 12 zN Hz^(-1/2) at a temperature of 1.2 K using a resonator made of a carbon nanotube. An ultra-sensitive method based on cross-correlated electrical noise measurements, in combination with parametric downconversion, is used to detect the low-amplitude vibrations of the nanotube induced by weak forces. The force sensitivity is quantified by applying a known capacitive force. This detection method also allows us to measure the Brownian vibrations of the nanotube down to cryogenic temperatures. Force sensing with nanotube resonators offers new opportunities for detecting and manipulating individual nuclear spins as well as for magnetometry measurements.Comment: Early version. To be published in Nature Nanotechnolog

Unexpected features of branched flow through high-mobility two-dimensional electron gases

GaAs-based two-dimensional electron gases (2DEGs) show a wealth of remarkable electronic states, and serve as the basis for fast transistors, research on electrons in nanostructures, and prototypes of quantum-computing schemes. All these uses depend on the extremely low levels of disorder in GaAs 2DEGs, with low-temperature mean free paths ranging from microns to hundreds of microns. Here we study how disorder affects the spatial structure of electron transport by imaging electron flow in three different GaAs/AlGaAs 2DEGs, whose mobilities range over an order of magnitude. As expected, electrons flow along narrow branches that we find remain straight over a distance roughly proportional to the mean free path. We also observe two unanticipated phenomena in high-mobility samples. In our highest-mobility sample we observe an almost complete absence of sharp impurity or defect scattering, indicated by the complete suppression of quantum coherent interference fringes. Also, branched flow through the chaotic potential of a high-mobility sample remains stable to significant changes to the initial conditions of injected electrons.Comment: 22 pages, 4 figures, 1 tabl

Validation of key behaviourally based mental health diagnoses in administrative data: suicide attempt, alcohol abuse, illicit drug abuse and tobacco use

<p>Abstract</p> <p>Background</p> <p>Observational research frequently uses administrative codes for mental health or substance use diagnoses and for important behaviours such as suicide attempts. We sought to validate codes (<it>International Classification of Diseases, 9^thedition, clinical modification </it>diagnostic and E-codes) entered in Veterans Health Administration administrative data for patients with depression versus a gold standard of electronic medical record text ("chart notation").</p> <p>Methods</p> <p>Three random samples of patients were selected, each stratified by geographic region, gender, and year of cohort entry, from a VHA depression treatment cohort from April 1, 1999 to September 30, 2004. The first sample was selected from patients who died by suicide, the second from patients who remained alive on the date of death of suicide cases, and the third from patients with a new start of a commonly used antidepressant medication. Four variables were assessed using administrative codes in the year prior to the index date: suicide attempt, alcohol abuse/dependence, drug abuse/dependence and tobacco use.</p> <p>Results</p> <p>Specificity was high (≥ 90%) for all four administrative codes, regardless of the sample. Sensitivity was ≤75% and was particularly low for suicide attempt (≤ 17%). Positive predictive values for alcohol dependence/abuse and tobacco use were high, but barely better than flipping a coin for illicit drug abuse/dependence. Sensitivity differed across the three samples, but was highest in the suicide death sample.</p> <p>Conclusions</p> <p>Administrative data-based diagnoses among VHA records have high specificity, but low sensitivity. The accuracy level varies by different diagnosis and by different patient subgroup.</p